Yoshikane X Isasmedjan SKD Gyuto 240mm Custom Handle
This special edition Yoshikane X Isasmedjan Gyuto is a collaboration we setup with Jonas Johnsson aka Isasmedjan in Sweden. Typically making the complete package, and those who know his work will attest to the quality of his blades, we asked Jonas if he would be willing to make some custom handles for some beautiful SKD Nashiji series blades from Yoshikane Hamono. What you see here is the result and it’s a stunning combination of Elm burl with Boxelder burl for the spacer. Each piece is unique, but they all contain a beautiful array eyes and lovely grain patterns. Yellow, brown, and black hues pair beautifully with the light kurouchi and plished steel. Only 4 pieces of this custom Yoshikane SKD Gyuto 240mm have been made and when they are gone, they are gone.
With SKD steel at the core these blades from Yoshikane Hamono are some of the most durable, high-performance knives around. The SKD steel is hard, it’s very hard, we are talking 64HRC-65HRC meaning that these knives will take a very acute and razor-sharp edge and they will hold it for a long time. While SKD is not classed as a stainless steel, with its high chromium content, it does have very decent stain resistance and superior wear resistance and toughness than is found in most stainless steels. With a protective stainless cladding these blades offer a very nice combination of characteristics that both fans of stainless and reactive steel knives will appreciate.
The geometry on these blades is up there with some of the best you can hope to find in Japanese knives. Leaning in the direction of a workhorse geometry, at least as far as Japanese knives are concerned, the blade has a tapered spine that is 3.6mm above the heel of the blade and quickly thins out to around 2.5mm as it heads towards the tip. The profile is fairly flat and has a persistent shallow curve beginning about 30mm from the heel. The blade is thin behind the edge (0.5mm) resulting in a very sharp blade with a delightful cutting experience.
Blade Type: Gyuto
Edge Length: 240mm
Spine Heel: 3.6mm
Spine Mid: 2.13mm
Spine Tip (20mm before): 1.4mm
Blade Height: 50mm
Cutting Edge Steel: SKD
Blade Construction: 3 Layer (San Mai)
Blade Finish: Textured
Handle Construction: Hidden Tang
Handle Materials: Elm Burl with Boxelder Burl Spacer
Saya Included: No
Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.
Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.
Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or one of the many premium reactive German and Swedish steels are susceptible to rust if not properly cared for. In this case we advise that you keep the knife dry between uses and when storing the knife for longer periods wiping the knife blade with Tsubaki oil or another food safe oil is a wise choice. This will not stop a patina forming on the blade, but it will stop rust. A patina can be a beautiful personal feature on your knife and helps to stop rust forming. So, dry your knife regularly between uses, store in a dry place and apply some Tsubaki oil from time to time when storing for long periods.
A reference guide to steel types
Handle Care: If you have a knife with a non-stabilised wooden handle, you can apply Tsubaki oil or another food safe oil to your handle from time to time. Food safe wax can be applied to both stabilised and no-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.