• Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai
  • Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai – detail view
  • Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai – side profile
  • Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai – handle detail
  • Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai – blade close-up
  • Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai – view 6
  • Kamon X Hangler High Chef Knife 235mm Damascus Clad Apex Ultra GoMai – view 7
1 7

Kamon X Hangler High Chef Knife 235 mm Damascus Clad Apex Ultra GoMai

Kamon X Hangler High Chef Knife 235 mm Damascus Clad Apex Ultra GoMai

By Collaboration

No longer available

Benjamin Kamon

Reserve your place

We'll only email you when there's something to say. Invitations go out in signup order as new work becomes available.

Das Kamon Messer High Chef 235 mm, entstanden in der außergewöhnlichen Zusammenarbeit von Benjamin Kamon und Tobias Hangler, ist ein wahres Meisterwerk. Mit einem Apex Ultra-Kern, umhüllt von 100 Lagen exquisit gemustertem Nickel-Damast, zeugt diese Klinge von Präzision und Kunstfertigkeit. Der konvexe Schliff, der sich vom Rücken bis zur Schneide erstreckt, sorgt für optimales Lösen der Lebensmittel und hervorragende Schneidleistung und macht das Messer ebenso funktional wie optisch ansprechend.

Benjamin Kamons charakteristische „Denty“-Textur unterstreicht die Schönheit der Klinge und erzeugt ein komplexes Muster aus ultrafeinen Wellen, die mit organischer Flüssigkeit wirbeln. Dieser atemberaubende Stahl harmoniert perfekt mit einem wunderschön strukturierten Griff aus amerikanischem Wüsteneisenholz, gefertigt in Kamons klassischer Rokkaku-Hanmaru-Form. Die Harmonie zwischen den hypnotisierenden Mustern des Stahls und den tiefen, natürlichen Tönen des Holzgriffs schafft eine nahtlose Verbindung von Form und Funktion.

Insgesamt ist dieses High Chef Messer eines der schönsten und sorgfältigsten Messer, die wir in den letzten Jahren gesehen haben. Seine organische, rustikale Ästhetik verleiht ihm sofort einen Klassikerstatus und macht es nicht nur zu einem hervorragenden Werkzeug, sondern auch zu einem wertvollen Erbstück für jeden ernsthaften Sammler oder Kochkünstler.

Product Specification
  • Blade Type:
  • Overall Length: 365 mm
  • Edge Length: 235mm
  • Spine Heel: 3.77mm
  • Spine Mid: 1.82mm
  • Spine Tip (20mm before): 0.45mm
  • Blade Height: 64mm
  • Weight: 236g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 67
  • Blade Construction:
  • Blade Finish: StrukturiertSäuregeätzt (erzwungene Patina)Satinpolitur
  • Grind:
  • Handle Construction:
  • Handle Materials: Ironwood, Copper
  • Handedness: Beidhändig
  • Saya / Storage Included: Yes

Blade type

Chef Knife

The Western chef's knife — the traditional European all-purpose blade, typically 200 to 250 mm, with a curved belly built to rock against the board. The pronounced curve from heel to tip suits a continuous rocking motion for mincing herbs and aromatics, and the blade is generally thicker, heavier, and softer than its Japanese counterpart, made to absorb hard and varied use.

That robustness is the trade-off. A Western chef's knife is forgiving, durable, and happy with bones, hard squash, and rough handling, but its softer steel and thicker grind mean it is rarely as keen as a comparable gyuto and needs more frequent honing to stay sharp. It is the dependable generalist of the kitchen — what it gives up in refinement it returns in resilience.

View full knife type guide →

Cutting edge steel

Apex Ultra

Low-alloy fine-grain carbon tool steel

Typical HRC
64–68
Corrosion class
Carbon
Production
Conventional
Origin
Austria (developed by Tobias Hangler and Marco Guldimann; project led by Hangler at Messerschmiede Hangler)

Apex Ultra is one of the most carefully engineered non-stainless kitchen knife steels in modern circulation, and the project of an Austrian smith — Tobias Hangler — who set out, with Marco Guldimann, to design a steel for the kitchen rather than borrow one from another industry. It carries roughly 1.25 percent carbon, around four percent chromium, modest tungsten and molybdenum, and a small vanadium addition. The composition is tuned to produce a fine, evenly distributed carbide structure that supports hardness up to 67 HRC while delivering toughness comparable to 52100 at the same hardness — a combination that is the entire point of the steel.

What this means for a cook is unusual permission. You can ask a maker to grind an Apex Ultra knife thin enough that a White #1 owner would call you brave, then ask for the heat treatment to land at 65 HRC, and the resulting edge will hold for longer than Aogami Super without microchipping. It sharpens cleanly on natural and synthetic stones alike and patinas slowly because of the chromium content, though it is not stainless and should be treated as a carbon steel.

Apex Ultra has become a signature steel of the European maker community, and the Modern Cooking catalogue carries an unusually deep bench of smiths working in it. Tobias Hangler himself heads that group, alongside Marco Guldimann, Benjamin Kamon, Martin Huber, Jonas Johnsson, Karol Karyś, Birch & Bevel, and MCx. It is genuinely a step forward — one of the relatively few cases where the marketing claims and the underlying metallurgical data are saying the same thing.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Walkschliff

A traditional Solingen grind — also called a kettle or kessel bulge grind — in which the blade is hollowed high on the side so its thickest point sits a little below the spine rather than at it. Below that bulge the steel is taken down to an extremely thin, finely convexed cutting edge, combining the rigidity of a thick upper blade with the keenness of a very thin one.

The Walkschliff is among the most demanding grinds to execute, historically reserved for the finest German knives and requiring years of a grinder's experience to do well. For the buyer it is a high-craft European alternative to the thin flat grinds of Japanese knives — strong, stable, and keen — but it is a hand-ground specialism, and a knife that carries it is priced for the skill it took to make.

View full grind guide →

Handle construction

Takedown

A takedown is a hidden-tang construction built to come apart. The tang passes through the handle and is drawn up by a threaded fitting — a nut at the butt, or a pommel that screws down — so the handle can be dismantled and re-fitted rather than being permanently bonded in place. Everything else follows the hidden-tang pattern: a concealed tang inside a one-piece handle, with no steel showing along the grip.

The point of the design is serviceability. Because the handle is mechanical rather than glued, it can be taken off for thorough cleaning and drying, swapped for a different material or profile, or replaced entirely if it is ever damaged — all without destroying the original fittings. It is the construction to choose for a knife meant to be maintained and kept for the long term, and for owners who like the option of changing a handle later.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen