• Honyaki Gyuto
  • Honyaki Gyuto – detail view
  • Honyaki Gyuto – side profile
  • Honyaki Gyuto – handle detail
  • Honyaki Gyuto – blade close-up
  • Honyaki Gyuto – view 6
1 6

Honyaki Gyuto

Honyaki Gyuto

By Birch & Bevel

CHF 1,103.00
CHF 1,103.00
Sale Ausverkauft
Inkl. Steuern. Versand wird beim Checkout berechnet

Auf Lager

Made to Order

A few weeks from forge to door.

You've caught us at a moment when this line is between batches. These knives are in constant production at our partner forge in Sweden, so your order will be made from scratch.

Delivery is typically 3–4 weeks, but can take up to 6 weeks. We'll ship directly from the forge to expedite the process — no warehouse stopover.

Thank you for your patience and support.
Größe
Handle material

Honyaki-Küchenmesser werden mit einer Technik geschmiedet, die der beim Schmieden japanischer Katanas am ähnlichsten ist. Die Technik wurde entwickelt, um die Stärke und Schärfe der Schwerter zu verbessern. Honyaki werden aus Stählen mit hohem Kohlenstoffgehalt unter Verwendung einer variablen Härtetechnik geschmiedet, bei der ein spezieller Ton auf den Klingenrücken aufgetragen wird, bevor er abgeschreckt wird. Dieser Prozess hinterlässt die Klinge mit einem weichen, elastischen Rücken, einem Hamon (oder einer Härtelinie) und einer harten, scharfen Kante.

Honyaki-Küchenmesser sind bei Sammlern und Enthusiasten aufgrund der außergewöhnlichen Schönheit des Hamon und des hohen handwerklichen Könnens, das zur Herstellung dieser Messer erforderlich ist, sehr beliebt. Selbst bei den talentiertesten Schmieden versagen bis zu 30 % ihrer Klingen. Aus diesem Grund können wir die Serien Birch und Bevel Honyaki Gyuto nur in kleinsten Stückzahlen produzieren.

Unsere Honyaki Gyuto's sind mit einem sich verjüngenden Rücken und geschliffenem Walkschliff geschmiedet, eine Schleiftechnik, die von Hand ausgeführt wird und viel Geschick erfordert. Der Walkschliff-Schliff zeichnet sich dadurch aus, dass sich die dickste Stelle der Klinge unterhalb des Rückens befindet. Der Rücken ist also dünner als die gesamte Klinge. Diese ovale Form sorgt für hohe Stabilität, verbesserte Schneidleistung und eine extrem dünne und fein geschliffene Schneide.


Product Specification
  • Blade Type:
  • Edge Length: 230mm | 250mm
  • Spine Heel: 3.6mm | 3.6mm
  • Spine Mid: 2.2mm | 2.2mm
  • Spine Tip (20mm before): 1mm | 1mm
  • Blade Height: 55mm | 57mm
  • Weight: 177g | 211g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 64
  • Blade Construction:
  • Blade Finish: Satinpolitur
  • Grind:
  • Handle Construction:
  • Handle Materials: Oak, Birchbark, Brass
  • Handedness: Beidhändig

Blade type

Gyuto

牛刀

The Japanese take on the Western chef's knife, and the most versatile blade in a modern kitchen. A gyuto carries a long, gently curved edge — most often 210 to 270 mm — that allows both push cuts and a rocking motion, with a pointed tip for fine work and enough height at the heel to keep knuckles clear of the board. It handles proteins, vegetables, and herbs without complaint, which is why most cooks reach for it first.

Compared with a European chef's knife, the gyuto is usually thinner, harder, and lighter, ground to a finer edge that rewards good board technique and regular honing. That same thinness is the trade-off: the edge is less forgiving of bone, frozen food, and twisting cuts, and it asks for a little more care in maintenance in exchange for its keenness.

View full knife type guide →

Cutting edge steel

26C3

High-carbon, low-alloy fine-grain steel

Typical HRC
63–67
Corrosion class
Carbon
Production
Conventional
Origin
Sweden (Sandvik / Alleima)

26C3 is one of the most quietly important kitchen knife steels of the past decade. Originally engineered by Sandvik as a razor steel — its lineage runs straight to UHB-20C — it carries about 1.25 to 1.30 percent carbon, very low manganese and sulphur, and a small chromium addition to control grain size. The result is a steel that hardens cleanly into the mid-sixties HRC while retaining genuinely useful toughness for its hardness, an unusual combination outside the powder-metallurgy world.

For the cook, 26C3 sharpens the way the best Japanese white papers sharpen — a quick burr that wipes off cleanly, and a polished edge that holds a screaming apex without microchipping. Toughness at 64 HRC is comparable to or better than 52100 at the same hardness in published testing, which is part of why the Larrin-Thomas-and-friends generation of makers gravitated to it; it lets you grind thinner without paying for it later. Like all clean carbons, it patinas willingly and benefits from a wipe between tasks.

26C3 has become something of a default among UK and European bladesmiths who want a no-compromise carbon edge, and it is the chemical parent of SheffCut, which adds a sliver of niobium to refine grain further. Among the makers Modern Cooking carries, Birch & Bevel, Karol Karyś, Jonas Johnsson, Tobias Heldqvist, Brook Turner, and Fredrik Spåre work in 26C3. It is one of the few non-stainless steels you can recommend to a cook coming from VG-10 without apology.

View full steel guide →

Blade construction

Mono Steel

A knife forged from a single piece of steel — no laminations, no clad layers. The simplest and most direct construction. The entire blade is the cutting steel, with no softer outer jacket to protect or contrast it. Most contemporary Western kitchen knives in carbon and stainless steel are mono-steel constructions, as are honyaki and most European bladesmith work.

The trade-off is straightforward: mono-steel knives are easier to forge, sharpen, and reason about, but the entire blade carries the cutting steel's properties — including its reactivity if it's a clean carbon. There is no soft jacket to protect a more brittle core from impact, so the heat treatment and geometry have to do all the work.

View full construction guide →

Grind

Walkschliff

A traditional Solingen grind — also called a kettle or kessel bulge grind — in which the blade is hollowed high on the side so its thickest point sits a little below the spine rather than at it. Below that bulge the steel is taken down to an extremely thin, finely convexed cutting edge, combining the rigidity of a thick upper blade with the keenness of a very thin one.

The Walkschliff is among the most demanding grinds to execute, historically reserved for the finest German knives and requiring years of a grinder's experience to do well. For the buyer it is a high-craft European alternative to the thin flat grinds of Japanese knives — strong, stable, and keen — but it is a hand-ground specialism, and a knife that carries it is priced for the skill it took to make.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen