• Chef Knife 215mm GoMai Silverline 1.2419 Full Tang
  • Chef Knife 215mm GoMai Silverline 1.2419 Full Tang – detail view
  • Chef Knife 215mm GoMai Silverline 1.2419 Full Tang – side profile
  • Chef Knife 215mm GoMai Silverline 1.2419 Full Tang – handle detail
  • Chef Knife 215mm GoMai Silverline 1.2419 Full Tang – blade close-up
  • Chef Knife 215mm GoMai Silverline 1.2419 Full Tang – view 6
1 6

Kochmesser 215mm GoMai Silverline 1.2419 Full Tang

Kochmesser 215mm GoMai Silverline 1.2419 Full Tang

By Martin Huber

No longer available

Martin Huber

Reserve your place

We'll only email you when there's something to say. Invitations go out in signup order as new work becomes available.

Eine außergewöhnliche Kreation, handgeschmiedet vom Messerschmied Martin Huber. Mit einem spitzen Kochmesserprofil und einer durchgehenden Griffkonstruktion unterscheidet sich dieses Messer ein wenig von dem, was wir normalerweise von Martin sehen.

Das für kulinarische Spitzenleistungen fein abgestimmte Messer verfügt über eine 215 mm lange, präzisionsgeschliffene Schneide. Die Rückenmaße zeigen eine feine und subtile Verjüngung, die ein nahtloses Schneiden von der Ferse bis zur Spitze gewährleistet. Mit einem Gewicht von 227 g bietet es ein perfektes Gleichgewicht zwischen Gewicht und Kontrolle, während der Kern aus 1.2419-Stahl mit einer Härte von 65 HRC für anhaltende Schärfe sorgt.

Die 5-lagige Go-Mai-Konstruktion der Klinge erhöht ihre Haltbarkeit und Belastbarkeit und bietet gleichzeitig ein ergänzendes säuregeätztes, satiniertes Finish, das Charakter ausstrahlt. Der Flachschliff verleiht der Klinge eine dünne und rasiermesserscharfe Schneide.

Der Griff aus einer innovativen Mischung aus Kohlefaser, G10 und Wabenharz besticht durch Ästhetik und Komfort. Die durchgehende Erlkonstruktion verleiht der Klinge eine Stütze und ein zufriedenstellendes Gewicht und Gleichgewicht.

Das Silverline-Kochmesser von Martin Huber ist mehr als nur ein Werkzeug; es verkörpert Kreativität und herausragendes Design. Egal, ob Sie ein professioneller Koch oder ein begeisterter Hobbykoch sind, dieses Messer verspricht ein Erlebnis, das Form und Funktion in Einklang bringt und Ihre kulinarische Reise auf ein beispielloses Niveau hebt.

Product Specification
  • Blade Type:
  • Edge Length: 215mm
  • Spine Heel: 3.12mm
  • Spine Mid: 2.67mm
  • Spine Tip (20mm before): 1.01mm
  • Blade Height: 55mm
  • Weight: 227g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 65
  • Blade Construction:
  • Blade Finish: Säuregeätzt (Zwangspatina)Satinpolitur
  • Grind:
  • Handle Construction:
  • Handle Materials: Carbon Fibre, G10, Honey Comb Resin
  • Handedness: Beidhändig

Blade type

Chef Knife

The Western chef's knife — the traditional European all-purpose blade, typically 200 to 250 mm, with a curved belly built to rock against the board. The pronounced curve from heel to tip suits a continuous rocking motion for mincing herbs and aromatics, and the blade is generally thicker, heavier, and softer than its Japanese counterpart, made to absorb hard and varied use.

That robustness is the trade-off. A Western chef's knife is forgiving, durable, and happy with bones, hard squash, and rough handling, but its softer steel and thicker grind mean it is rarely as keen as a comparable gyuto and needs more frequent honing to stay sharp. It is the dependable generalist of the kitchen — what it gives up in refinement it returns in resilience.

View full knife type guide →

Cutting edge steel

1.2419

Low-alloy tungsten-chromium tool steel

Typical HRC
62–65
Corrosion class
Carbon
Production
Conventional
Origin
Germany (DIN 105WCr6); approximately the European 125SC family in spirit but more alloyed

1.2419 is the German tungsten-chromium tool steel that sits a clear step above the simple carbons in alloy content, with about 1.05 percent carbon, 1.0 percent chromium, and 1.1 percent tungsten. It is closely related to 1.2519 (which adds vanadium) and to its leaner sub-variant 1.2419.05.

In a kitchen knife it runs at 63–64 HRC, sharpens cleanly, and produces an edge with notably better wear resistance than W2 or 80CrV2. The W- and Cr-rich carbides do real work; toughness is good for the hardness, and patina behaviour is moderate. It is a steel that rewards a maker who can dial in heat treatment and grain control.

European bladesmiths have used 1.2419 for kitchen and outdoor knives for decades. It is well respected in the Solingen tradition and remains a credible choice for a refined carbon-edge knife. Among the makers Modern Cooking carries, Martin Huber, Karol Karyś, Fredrik Spåre, Michał Lipiński, and Birch & Bevel work in this steel. The community sometimes discusses 1.2419 in the same breath as Aogami #1 — not chemically identical, but in a similar performance neighbourhood.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Flat

A grind in which the blade tapers in a straight line from the spine down toward the edge, with no curve or hollow in the bevel. The flat grind is the most common geometry on modern double-bevel kitchen knives because it balances cutting performance and durability: thin enough behind the edge to slice well, with enough steel behind it to stay strong.

A true full flat grind, running from spine to edge, is keen but can wedge in dense produce as the food meets the widening blade; many kitchen knives use a partial flat grind that begins lower on the blade to manage that. The flat grind's appeal is its predictability — it sharpens straightforwardly, behaves consistently, and asks nothing unusual of the user.

View full grind guide →

Handle construction

Full Tang

A construction in which the blade steel runs the full length and width of the handle, forming a flat core between two handle scales. The scales are fixed to either face of the tang with pins, rivets, or adhesive, and the tang's outline stays visible as a strip of steel around the top, bottom, and butt of the handle — often with the pin heads showing as a row down each side. It is the dominant construction in Western kitchen and outdoor knives.

Because the steel continues all the way to the butt, the handle is essentially the tang dressed in two scales, and the grip is ground and shaped from that sandwiched assembly as a whole. The extra steel carries weight and balance back toward the hand, giving the solid, blade-and-handle-as-one feel that defines the style, and it leaves the edge of the tang on show as part of the knife's line.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen