• Bunka 180mm Junpaku Shirogami #1
  • Bunka 180mm Junpaku Shirogami #1 – detail view
  • Bunka 180mm Junpaku Shirogami #1 – side profile
  • Bunka 180mm Junpaku Shirogami #1 – handle detail
  • Bunka 180mm Junpaku Shirogami #1 – blade close-up
1 5

Bunka 180mm Junpaku Shirogami #1

Bunka 180mm Junpaku Shirogami #1

By Hado Knives

CHF 313.00
CHF 313.00
Sale Ausverkauft
Inkl. Steuern. Versand wird beim Checkout berechnet

Nicht vorrätig

Der Kernstahl dieses HADO Junpaku Gyuto 210 mm wurde in Sakai, Japan, vom Meisterschmied Yoshikazu Tanaka geschmiedet. Er besteht aus Hitachi Metals Yasuki Specialty Steel (YSS) Shirogami, einem der reinsten YSS-Kohlenstoffstähle und dem Tamahagane-Stahl am nächsten. Der Stahl kann für manche Schmiede eine Herausforderung darstellen, doch in den Händen von Yoshikazu-san können Sie sicher sein, dass das Ergebnis eine wunderbar harte und dennoch robuste Schneide ist, die wunderbar scharf wird.

Das Messer verfügt über eine San Mai- oder 3-Lagen-Konstruktion mit Shirogami-Stahl, geschützt durch eine Eisenummantelung. Geschliffen und geschärft von Tadataka Maruyama von HADO Knives, ist die Rückenstärke bis zur Hauptfase gleichmäßig, verjüngt sich dann zur Spitze hin sehr schnell und verleiht dem Messer dadurch ein sehr stabiles Gefühl. Diese Messer mit breiter Fase und flachem Schliff sind superscharf und hinter der Schneide dünn. Wenn Sie mit dem Fingernagel gegen die Schneide drücken, spüren Sie eine leichte Biegung, die zeigt, wie dünn und scharf diese Messer sind.

Tadataka-San hat in puncto Passform und Verarbeitung hervorragende Arbeit geleistet. Jedes Messer verfügt über einen wunderschön polierten und abgerundeten Rücken sowie eine kunstvoll geschliffene, eckige Hohlkehle. Eine Mischung aus Texturen auf der Vorderseite der Klinge unterstreicht die dreischichtige San Mai-Konstruktion und betont die beeindruckende Ummantelung.

Zurück zum Griff: Ein atemberaubender zweifarbiger Eichen-Urushi-Griff mit mattiertem Natur-Urushi-Lack auf der Ober- und Unterseite des achteckigen Griffs mit verstecktem Erl und einem sehr edlen, hochglanzpolierten roten Urushi an den Seiten. Die Form des Griffs entspricht der traditionellen japanischen Achteckform und liegt sehr angenehm in der Hand.

Dies ist ein sehr edles Messer mit erstaunlicher Passform und Verarbeitung, erstklassigem Schliff und einem schönen, geschmackvollen Design.

Product Specification
  • Blade Type:
  • Edge Length: 180mm
  • Spine Heel: 3.3mm
  • Spine Mid: 2.75mm
  • Spine Tip (20mm before): 1.6mm
  • Blade Height: 49.7mm
  • Weight: 175g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 62+
  • Blade Construction:
  • Blade Finish: Kurouchi
  • Grind:
  • Handle Construction:
  • Handle Materials: Oak Urushi
  • Handedness: Beidhändig

Blade type

Bunka

文化

A close cousin of the santoku, distinguished by its reverse-tanto tip — an angular k-tip where the spine drops sharply to meet a mostly flat edge. The flat profile excels at push cutting, and the aggressive tip gives back the fine point work a santoku's rounded nose gives up, making the bunka a versatile mid-length all-rounder with a distinctive silhouette.

The bunka's appeal is as much geometry as style: the angular tip is excellent for detail and scoring but asks for a little respect, since the point sits lower and sharper than on a curved blade. Performance otherwise tracks the santoku closely, so the choice between them usually comes down to tip preference and how the knife feels in the hand.

View full knife type guide →

Cutting edge steel

Shirogami #1

Ultra-pure plain carbon steel

Typical HRC
64–67
Corrosion class
Carbon
Production
Conventional
Origin
Japan (Hitachi YSS / Proterial)

Shirogami #1 — White Paper #1 — is the highest-carbon, highest-purity entry in Hitachi's white-paper family, with approximately 1.30 to 1.40 percent carbon and impurities (P, S, Mn, Si) held to extremely low levels. Without chromium, tungsten, or vanadium, it is the closest thing the modern industrial world has to a continuation of the traditional Japanese tamahagane lineage in commercial form.

In a finished kitchen knife it can run at 64–66 HRC, sharpens to an extraordinary apex on natural and fine synthetic stones, and gives a feel at the cutting board that aficionados describe as glassy. Edge retention is modest — the absence of carbide-forming alloys means the steel is wear-limited — and toughness at this hardness is genuinely low; a thin Shirogami #1 edge will chip on bone or on a poor cutting board. The patina is energetic.

It is the steel of choice for honyaki and high-end clad single-bevels, and it remains the touchstone against which other ultra-clean carbons like 125SC and C130 are judged. Among the makers Modern Cooking carries, Hado Knives and Simon Maillet work in Shirogami #1. Recommend it only to a cook who understands what it is asking of them.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Flat

A grind in which the blade tapers in a straight line from the spine down toward the edge, with no curve or hollow in the bevel. The flat grind is the most common geometry on modern double-bevel kitchen knives because it balances cutting performance and durability: thin enough behind the edge to slice well, with enough steel behind it to stay strong.

A true full flat grind, running from spine to edge, is keen but can wedge in dense produce as the food meets the widening blade; many kitchen knives use a partial flat grind that begins lower on the blade to manage that. The flat grind's appeal is its predictability — it sharpens straightforwardly, behaves consistently, and asks nothing unusual of the user.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen