• Nakiri 175mm Vtoku2 Stainless Clad Cottonwood Frame Handle
  • Nakiri 175mm Vtoku2 Stainless Clad Cottonwood Frame Handle – detail view
  • Nakiri 175mm Vtoku2 Stainless Clad Cottonwood Frame Handle – side profile
  • Nakiri 175mm Vtoku2 Stainless Clad Cottonwood Frame Handle – handle detail
  • Nakiri 175mm Vtoku2 Stainless Clad Cottonwood Frame Handle – blade close-up
  • Nakiri 175mm Vtoku2 Stainless Clad Cottonwood Frame Handle – view 6
1 6

Nakiri 175 mm Vtoku2 Rostfreier Rahmengriff aus Pappelholz

Nakiri 175 mm Vtoku2 Rostfreier Rahmengriff aus Pappelholz

By Skye Eilers

No longer available

Skye Eilers

Reserve your place

We'll only email you when there's something to say. Invitations go out in signup order as new work becomes available.

In jedem Detail dieses Messers demonstriert Skye ein breites Spektrum beeindruckender Fähigkeiten. Vom sauberen, gleichmäßig konvexen Hochleistungsschliff und der Detailarbeit rund um die Fehlschärfe bis hin zur unglaublichen Passform und Verarbeitung des achteckigen Rahmengriffs. Jedes Element wurde perfekt ausgeführt.

Handgeschliffener, satinierter Edelstahl umhüllt den Vtoku2-Kohlenstoffstahlkern mit seiner pechschwarzen, kaffeegeätzten Zwangspatina. Eine subtile Nashiji-Textur um die Fehlschärfe rundet das Finish der Klinge ab. Mit Blick auf den Schliff weist das Messer eine leichte distale Verjüngung am Rücken auf, die im Durchschnitt etwa 2,5 mm beträgt. Konvex geschliffen und mit einer rasiermesserscharfen Kante wird das Messer unglaublich gut abschneiden. Das Profil ist sehr klassisch und eindeutig von seinen japanischen Ursprüngen inspiriert.

Eine mit Luftspalt versehene Dichtung verbindet den Erl mit dem Griff und demonstriert einmal mehr Skyes Geschick als Handwerker. Der Griff selbst ist eine Rahmenkonstruktion, achteckig, verdecktes Erl-Design. Hergestellt aus stabilisiertem Cottonwood, weißem G10, stabilisierter hawaiianischer Mango und afrikanischem Blackwood ist das Ergebnis eine einzigartige und schöne Meisterklasse in Zimmerei und Tischlerei.

Insgesamt ein erstklassiges Werk dieses jungen Neuseeländers, eindeutig ein aufgehender Stern!

Product Specification
  • Blade Type:
  • Edge Length: 175mm
  • Spine Heel: 2.97mm
  • Spine Mid: 2.28mm
  • Spine Tip (20mm before): 1.9mm
  • Blade Height: 58mm
  • Weight: 206g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 64
  • Blade Construction:
  • Blade Finish: Mattpolitur
  • Grind:
  • Handle Construction:
  • Handle Materials: Stabilised Cottonwood, White G10, Stabilised Hawaiian Mango, African Blackwood
  • Handedness: Beidhändig

Blade type

Nakiri

菜切

A double-bevel vegetable knife with a tall, rectangular blade and a straight edge that meets the board along its full length. That flat profile is built for one job done exceptionally well: clean, full-contact push and chop cuts through vegetables, with the height giving knuckle clearance and a broad face to guide sliced produce. There is no belly to rock, because rocking is not what it is for.

The nakiri's specialisation is also its limit. It is superb on vegetables and unhurried prep, but the straight edge and squared-off tip make it poor at the tip work, rocking, and protein tasks a gyuto or santoku handle easily. It is best understood as a dedicated vegetable knife that earns its place alongside a more general blade rather than replacing one.

View full knife type guide →

Cutting edge steel

V-Toku2

Low-alloy high-carbon tungsten-chromium tool steel

Typical HRC
63–66
Corrosion class
Carbon
Production
Conventional
Origin
Japan (Takefu Special Steel)

Editorial note: V-Toku2 is sometimes described in online write-ups as "semi-stainless." The steel's chromium content (around 0.25 percent) is too low to support that claim — V-Toku2 is unambiguously a clean, reactive carbon steel. It will patina and rust if neglected, and should be cared for accordingly.

The composition is approximately 1.05 percent carbon, 0.25 percent chromium, 1.25 percent tungsten, and a small vanadium addition. Conceptually it is Takefu's answer to Aogami #2: similar W-Cr-C balance, similar feel at the stone, similar performance at the apex. In a finished knife it runs at 62–65 HRC, sharpens cleanly, and produces a refined edge with good wear resistance from the tungsten carbides.

V-Toku2 is increasingly seen in mid-tier Japanese clad knives where the maker wants an Aogami-feel carbon without committing to Hitachi stock. Among the makers Modern Cooking carries, Adonis Forged Arts and Oatley Knives work in V-Toku2. It is a quietly capable steel and a good answer for a cook who wants the "blue paper" experience from a non-Hitachi maker.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Convex

A grind whose bevel bulges outward in a gentle curve from spine to edge, rather than running flat. That extra steel directly behind the edge makes a convex grind notably strong and resistant to chipping, while the curved geometry helps food release and lets the blade glide through dense ingredients with less wedging than a flat grind.

The strength comes at the cost of ultimate thinness and ease of maintenance. A convex edge has more metal behind it, so it is not quite as effortlessly keen as a thinly flat-ground edge, and it is harder to sharpen freehand — holding the curve takes a stropping technique or a deliberate hand rather than a single fixed angle. The reward is an exceptionally tough, smooth-cutting edge.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen