• Gyuto 230mm C130 Suminagashi Clad
  • Gyuto 230mm C130 Suminagashi Clad – detail view
  • Gyuto 230mm C130 Suminagashi Clad – side profile
  • Gyuto 230mm C130 Suminagashi Clad – handle detail
  • Gyuto 230mm C130 Suminagashi Clad – blade close-up
  • Gyuto 230mm C130 Suminagashi Clad – view 6
  • Gyuto 230mm C130 Suminagashi Clad – view 7
  • Gyuto 230mm C130 Suminagashi Clad – view 8
  • Gyuto 230mm C130 Suminagashi Clad – view 9
  • Gyuto 230mm C130 Suminagashi Clad – view 10
1 10

Gyuto 230 mm C130 Suminagashi Clad

Gyuto 230 mm C130 Suminagashi Clad

By Simon Maillet

No longer available

Simon Maillet

Reserve your place

We'll only email you when there's something to say. Invitations go out in signup order as new work becomes available.

Eine mit Suminagashi verkleidete C130-Klinge von Simon Maillet. Mit unprätentiösem, rustikalem Aussehen und erstklassiger Passform und Verarbeitung konzentriert sich Simon weiterhin auf die Schönheit, die in ihm steckt.

Ein hochwertiger C130-Stahlkern, geschliffen auf einem Wasserrad für eine konsistente, leicht zu wartende flache Primärfase. Super dünn hinter der Schneide, das Messer schneidet schön. Ein klassisches Gyuto-Profil mit Santoku-Spitze und einer Kantengeometrie, die sich auf dem Board großartig anfühlt. Eine subtile distale Verjüngung verleiht der Klinge Vielseitigkeit und ein angenehmes, ausgewogenes Gefühl.

Ein alter Eichen- und G10-Griff in Simons maßgeschneiderter achteckiger Form mit übergroßer Zwinge. Es ist eine sehr bequeme Form und eine Freude, es in der Hand zu haben.

Insgesamt ein wunderschönes, gut gemachtes Messer, das entworfen wurde, um ein Leben lang leicht zu wartende Freude zu bereiten.

 


Product Specification
  • Blade Type:
  • Edge Length: 230mm
  • Spine Heel: 3.3mm
  • Spine Mid: 2.37mm
  • Spine Tip (20mm before): 1.5mm
  • Blade Height: 54.5mm
  • Weight: 192g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 64
  • Blade Construction:
  • Blade Finish: Kurouchi, Säuregeätzt (erzwungene Patina)
  • Grind:
  • Handle Construction:
  • Handle Materials: Ancient Bog Oak, G10
  • Handedness: Beidhändig

Blade type

Gyuto

牛刀

The Japanese take on the Western chef's knife, and the most versatile blade in a modern kitchen. A gyuto carries a long, gently curved edge — most often 210 to 270 mm — that allows both push cuts and a rocking motion, with a pointed tip for fine work and enough height at the heel to keep knuckles clear of the board. It handles proteins, vegetables, and herbs without complaint, which is why most cooks reach for it first.

Compared with a European chef's knife, the gyuto is usually thinner, harder, and lighter, ground to a finer edge that rewards good board technique and regular honing. That same thinness is the trade-off: the edge is less forgiving of bone, frozen food, and twisting cuts, and it asks for a little more care in maintenance in exchange for its keenness.

View full knife type guide →

Cutting edge steel

C130

Plain high-carbon tool steel

Typical HRC
64–66
Corrosion class
Carbon
Production
Conventional
Origin
Europe (≈ DIN 1.1563 / C125U)

C130 is the high end of the EN simple-carbon ladder: about 1.25 to 1.30 percent carbon with no chromium, very little manganese, and nothing else of consequence. In its commercial form it overlaps with C125U / 1.1563, and it is becoming rare on the open market — high-purity simple carbon stock is being squeezed out by alloyed and powder steels.

For the maker and the cook this is a steel in the 125SC and Shirogami #1 family: extremely keen at the apex, capable of running into the mid-sixties HRC, with the corresponding willingness to patina aggressively if neglected. Toughness is the limiter — at this carbon content, fine grain and a careful heat treat are essential, and a maker who can dial them in produces a knife that genuinely competes with the best Japanese white papers.

C130 is a connoisseur's steel — uncommon, demanding, and capable of remarkable performance in the right hands. It is most often seen in bespoke European and UK bladesmith work where the maker explicitly wants a high-carbon, low-alloy edge philosophy. Among the makers Modern Cooking carries, Joel Black and Simon Maillet work in C130.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Flat

A grind in which the blade tapers in a straight line from the spine down toward the edge, with no curve or hollow in the bevel. The flat grind is the most common geometry on modern double-bevel kitchen knives because it balances cutting performance and durability: thin enough behind the edge to slice well, with enough steel behind it to stay strong.

A true full flat grind, running from spine to edge, is keen but can wedge in dense produce as the food meets the widening blade; many kitchen knives use a partial flat grind that begins lower on the blade to manage that. The flat grind's appeal is its predictability — it sharpens straightforwardly, behaves consistently, and asks nothing unusual of the user.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen