• Santoku 180mm 100 Layer Damascus Turkish Walnut
  • Santoku 180mm 100 Layer Damascus Turkish Walnut – detail view
  • Santoku 180mm 100 Layer Damascus Turkish Walnut – side profile
  • Santoku 180mm 100 Layer Damascus Turkish Walnut – handle detail
  • Santoku 180mm 100 Layer Damascus Turkish Walnut – blade close-up
1 5

Santoku 180mm 100 Lagen Damast Türkischer Nussbaum

Santoku 180mm 100 Lagen Damast Türkischer Nussbaum

By Martin Huber

€895,95 EUR
€895,95 EUR
Sale Ausverkauft
Inkl. Steuern. Versand wird beim Checkout berechnet

Niedriger Lagerbestand: 1 verbleibend

Die mit kompromissloser Liebe zum Detail gefertigten Küchenmesser von Martin Huber stellen den Höhepunkt handwerklicher Klingenherstellung dar. In Zusammenarbeit mit Martin haben wir eine außergewöhnliche Produktreihe geschaffen, die zeitlose Handwerkskunst mit innovativer Stahltechnologie und durchdachtem Design verbindet.

Jedes Messer wird aus hochwertigen Materialien geschmiedet, darunter markanter 50- und 100-lagiger Damaszenerstahl sowie die leistungsstarken wolframlegierten Kohlenstoffstähle 1.2419 und Apex Ultra – Stähle aus deutscher und österreichischer Produktion mit ähnlichen Leistungsmerkmalen wie die japanischen Stähle Blue und Blue Super. Diese Stähle bieten eine unglaubliche Schnitthaltigkeit, eine feine Körnung und die perfekte Balance aus Zähigkeit und Härte – ideal für anspruchsvolle Küchenumgebungen.

Martins Klingen sind bekannt für ihre präzise Geometrie, außergewöhnliche Konizität und perfekt geschliffenen Fasen. Das Ergebnis ist eine hervorragende Balance, müheloses Lösen der Lebensmittel und eine unübertroffene Schneidleistung, die Profis und passionierte Hobbyköche gleichermaßen zu schätzen wissen.

Die Griffe sind ergonomisch geformt und auf Komfort und Kontrolle ausgelegt. Von klassischen Coke-Flaschen-Silhouetten mit durchgehendem Erl und elegant verjüngtem Erl bis hin zu Rokkaku-Hanmaru-Griffen mit verstecktem Erl ist jedes Exemplar eine Studie in Form und Funktion. Die Auswahl der Griffmaterialien ist ebenso außergewöhnlich – mit exotischen Harthölzern wie Tasmanischem Blackwood, Türkischem Nussbaum und Amerikanischem Wüsteneisenholz sowie seltenen Maserknollen, stabilisierter Mooreiche und kunstharzgebundenen Kunststoffen. Viele sind mit hochwertigen Elementen wie TruStone, Messing, Edelstahl, Knochen, Horn und sogar hauseigenem Mokume-gane verziert.

Jedes Martin Huber Messer ist ein Meisterwerk in Passform und Verarbeitung – hier treffen traditionelle Techniken auf moderne Präzision. Das Ergebnis ist ein Werkzeug mit hervorragender Leistung, einem unglaublichen Handgefühl und einer Ästhetik, die ebenso raffiniert ist wie seine Schneide.

Product Specification
  • Blade Type:
  • Overall Length: 330 mm
  • Edge Length: 180mm
  • Spine Heel: 3.48mm
  • Spine Mid: 2.05mm
  • Spine Tip (20mm before): 1mm
  • Blade Height: 56mm
  • Weight: 147g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 61
  • Blade Construction:
  • Blade Finish: Säuregeätzt (erzwungene Patina)Brute de ForgeMattlack
  • Grind:
  • Handle Construction:
  • Handle Materials: Bog Oak, Turkish Walnut
  • Handedness: Beidhändig

Blade type

Santoku

三徳

A shorter, lighter all-purpose knife — usually 165 to 180 mm — built around the same "three virtues" the name describes: meat, fish, and vegetables. The edge is flatter than a gyuto's, with a rounded, sheepsfoot-style tip, favouring a straight up-and-down push cut over a rocking motion. Its compact length and modest height make it easy to control, which has made it the default home-kitchen knife across much of the world.

The santoku trades reach and tip precision for manageability. The flatter profile and shorter blade suit smaller hands, smaller boards, and cooks who chop rather than rock, but those same dimensions limit it on large proteins and tall vegetables where a longer, taller blade does the work more easily. Think of it as a gyuto's more approachable counterpart rather than a replacement.

View full knife type guide →

Cutting edge steel

Damascus

Pattern-welded composite construction (term, not an alloy)

Typical HRC
Determined by core / outer steel
Corrosion class
Varies
Production
Pattern-welded
Origin
Global

"Damascus" is a construction technique, not a steel. Modern damascus billets are made by forge-welding alternating layers of two or more steels — typically a higher- and a lower-carbon partner, or a contrasting-nickel pair — and then folding, twisting, ladder-cutting, or otherwise manipulating the billet to expose the layer interfaces in a pattern. The visual interest comes from the etch, which preferentially attacks one of the two steels.

For a kitchen knife the relevant question is always: what is the cutting steel? Many premium Japanese damascus knives are *clad* damascus — a VG-10, SG2 or carbon core inside a multi-layer damascus jacket — in which case the patterning is decorative and the cutting metallurgy is the core. In *full* damascus knives (more common in custom Western work) the entire blade is pattern-welded, and the cutting steel is the harder of the two laminate components.

This is one of the points where a customer-facing entry needs to be honest: a beautiful damascus pattern is a craft achievement, but it does not on its own tell the buyer how the knife will cut. The core steel does that, and a good maker will list both.

View full steel guide →

Blade construction

Damascus

Pattern-welded steel — multiple layers of different alloys forge-welded, then folded, twisted, ladder-cut, or otherwise manipulated to expose the layer interfaces in a visible pattern. The pattern is revealed by acid etching, which preferentially attacks one of the two steels in the laminate.

Damascus is a construction technique rather than a single steel. The cutting performance is determined by which steel forms the cutting edge — often a clad core in Japanese damascus knives, occasionally the harder of the two laminate steels in full-damascus Western work. A beautiful damascus pattern is a craft achievement; it does not on its own tell the buyer how the knife will cut. A good maker lists both the pattern and the core steel.

View full construction guide →

Grind

Flat

A grind in which the blade tapers in a straight line from the spine down toward the edge, with no curve or hollow in the bevel. The flat grind is the most common geometry on modern double-bevel kitchen knives because it balances cutting performance and durability: thin enough behind the edge to slice well, with enough steel behind it to stay strong.

A true full flat grind, running from spine to edge, is keen but can wedge in dense produce as the food meets the widening blade; many kitchen knives use a partial flat grind that begins lower on the blade to manage that. The flat grind's appeal is its predictability — it sharpens straightforwardly, behaves consistently, and asks nothing unusual of the user.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen