• Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Blade
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Handle
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Handle
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Profile
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Profile
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Choil
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Blade Saya
  • Fredrik Spåre Gyuto 220mm 2092 (52100) Nashiji with Saya - Saya
1 8

Gyuto 220mm 2092 (52100) Nashiji mit Saya

Gyuto 220mm 2092 (52100) Nashiji mit Saya

By Fredrik Spåre

No longer available

Fredrik Spåre

Reserve your place

We'll only email you when there's something to say. Invitations go out in signup order as new work becomes available.

Dies könnte derzeit eines der preiswertesten handgeschmiedeten Messer auf dem Markt sein, und die Qualität ist auch mit einigen der viel teureren Angebote vergleichbar. Die Fredrik Spåre Gyuto 220 mm Monostahlklinge ist eingeschmiedet 2092 (52100) Stahl und auf ca. 62-63 HRC gehärtet. Es ist ein großartiger Stahl mit sehr guter Schnitthaltigkeit.

Die Klingengeometrie ist wirklich gut mit einer durchschnittlichen Rückenstärke von 2,5 mm, präziser Konvexität und einer schön dünnen und scharfen Kante. Die Klinge fühlt sich leicht und gut ausbalanciert an, und das Schnittprofil ist schön geschliffen mit einer optimalen 50 mm flachen und allmählich fließenden Kurve. Die Klingenhöhe von 53 mm bietet eine angenehme Knöchelfreiheit. Es ist eine sehr schön geschliffene Klinge.

Der Gesamtstil der Klinge ist elegant und edel, ohne Ergonomie oder Leistung zu opfern. Der achteckige Walnussgriff liegt angenehm in der Hand und das handgehämmerte Messing verstärkt eine schöne Note, die das Messer von anderen Angeboten unterscheidet. Die Klinge hat auch ein schönes Nashiji-Finish, das sich großartig anfühlt, wenn man das Messer in einem Klemmgriff hält.

Dieses Messer wird auch mit Saya geliefert, was ein bereits großartiges Preis-Leistungs-Paket noch besser macht. Wir freuen uns sehr, Fredrik's Messer bei Modern Cooking anzubieten und sind sicher, dass Sie viel Freude damit haben werden.

Product Specification
  • Blade Type:
  • Edge Length: 220mm
  • Spine Heel: 3mm
  • Spine Mid: 2.5mm
  • Spine Tip (20mm before): 1.5mm
  • Blade Height: 53mm
  • Weight: 166g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 63
  • Blade Construction:
  • Blade Finish: Strukturiert
  • Grind:
  • Handle Construction:
  • Handle Materials: Walnut, Hammered Brass Bolster
  • Handedness: Beidhändig
  • Saya / Storage Included: Yes

Blade type

Gyuto

牛刀

The Japanese take on the Western chef's knife, and the most versatile blade in a modern kitchen. A gyuto carries a long, gently curved edge — most often 210 to 270 mm — that allows both push cuts and a rocking motion, with a pointed tip for fine work and enough height at the heel to keep knuckles clear of the board. It handles proteins, vegetables, and herbs without complaint, which is why most cooks reach for it first.

Compared with a European chef's knife, the gyuto is usually thinner, harder, and lighter, ground to a finer edge that rewards good board technique and regular honing. That same thinness is the trade-off: the edge is less forgiving of bone, frozen food, and twisting cuts, and it asks for a little more care in maintenance in exchange for its keenness.

View full knife type guide →

Cutting edge steel

52100

Low-alloy chromium bearing/tool steel

Typical HRC
61–65
Corrosion class
Carbon
Production
Conventional
Origin
United States (AISI 52100); identical to 1.3505 and 100Cr6

52100 is the most respected non-stainless steel in the Western kitchen knife tradition — a chrome-bearing alloy that began life as a ball-bearing grade and has, over decades of custom-maker use, become a reference for what a thoughtful carbon steel should feel like. Roughly one percent carbon and one and a half percent chromium put it just below the stainless threshold but well within the territory where chromium meaningfully refines grain and tightens the carbide structure.

A good 52100 kitchen knife typically lands between 62 and 63 HRC. It sharpens with little drama on almost any stone, takes an edge as clean as the simple carbons, and holds it for longer thanks to those Cr-rich carbides. Toughness is excellent for the hardness — published comparative data positions it as one of the better-balanced carbon steels available, especially when the heat treat includes the cryogenic treatment that this steel rewards. It will patina, but more politely than a white paper, and it is forgiving enough that a single rinse-and-dry routine is usually enough.

52100 is the canonical choice for cooks who love carbon-steel feel but want a touch more refinement than 1084, W2, or even 80CrV2. It dominates the American custom scene and shows up across high-end stock-removal work from a wide range of forging custom shops. Among the makers Modern Cooking carries, Fredrik Spåre, Brook Turner, and Nordquist Designs work in 52100. Note that it is the same alloy as German 1.3505 and the European 100Cr6; if a maker tells you they have used one, they have used all three.

Also known as:1.3505, 100Cr6

View full steel guide →

Blade construction

Mono Steel

A knife forged from a single piece of steel — no laminations, no clad layers. The simplest and most direct construction. The entire blade is the cutting steel, with no softer outer jacket to protect or contrast it. Most contemporary Western kitchen knives in carbon and stainless steel are mono-steel constructions, as are honyaki and most European bladesmith work.

The trade-off is straightforward: mono-steel knives are easier to forge, sharpen, and reason about, but the entire blade carries the cutting steel's properties — including its reactivity if it's a clean carbon. There is no soft jacket to protect a more brittle core from impact, so the heat treatment and geometry have to do all the work.

View full construction guide →

Grind

Convex

A grind whose bevel bulges outward in a gentle curve from spine to edge, rather than running flat. That extra steel directly behind the edge makes a convex grind notably strong and resistant to chipping, while the curved geometry helps food release and lets the blade glide through dense ingredients with less wedging than a flat grind.

The strength comes at the cost of ultimate thinness and ease of maintenance. A convex edge has more metal behind it, so it is not quite as effortlessly keen as a thinly flat-ground edge, and it is harder to sharpen freehand — holding the curve takes a stropping technique or a deliberate hand rather than a single fixed angle. The reward is an exceptionally tough, smooth-cutting edge.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

Vollständige Details anzeigen