• Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core
  • Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core – detail view
  • Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core – side profile
  • Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core – handle detail
  • Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core – blade close-up
  • Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core – view 6
1 6

Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core

Gyuto 230mm Multi Layered Nickel Cladding SheffCut Core

By Konstantinos Noulis

$2,396.00 NZD
$2,396.00 NZD
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 1 left

A beautiful workhorse, thin behind the edge to prevent wedging and splitting and yet ridged and tough at the spine. Subtly tapered and ground convex for great cutting performance. This blade is a root vegetables nightmare and will absolutely cruise through large batches of vegetable prep. The knife will also comfortably deal with proteins without tearing.

A kind of rare release from Konstantinos, this knife features his low layer nickel Damascus cladding or as he calls it “multilayered cladding”. Etched for contrast and with a nickel diffusion layer, it’s a beautiful design. The Sheffcut core is a steel based on the Swedish 26c3 and is a low alloyed carbon steel with a great reputation for sharpness, toughness, and easy maintainability.

The knife features a Nouko Knives signature hidden tang western handle with stainless bolster and a body shaped in Ironwood. It’s a very classy design that feels satisfying in the hand regardless of your grip. The bolster features a museum fit and like every element on the knife it is crafted thoughtfully and with care. Beautiful work from this Sheffield based artisan craftsman.

Product Specification
  • Blade Type:
  • Edge Length: 230mm
  • Spine Heel: 4.13mm
  • Spine Mid: 3.07mm
  • Spine Tip (20mm before): 2.07mm
  • Blade Height: 62mm
  • Weight: 308g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 65
  • Blade Construction:
  • Blade Finish: Brute de ForgeAcid Etched (Forced Patina)Matte Polish
  • Grind:
  • Handle Construction:
  • Handle Materials: Stainless Steel, Ironwood
  • Handedness: Ambidextrous

Blade type

Gyuto

牛刀

The Japanese take on the Western chef's knife, and the most versatile blade in a modern kitchen. A gyuto carries a long, gently curved edge — most often 210 to 270 mm — that allows both push cuts and a rocking motion, with a pointed tip for fine work and enough height at the heel to keep knuckles clear of the board. It handles proteins, vegetables, and herbs without complaint, which is why most cooks reach for it first.

Compared with a European chef's knife, the gyuto is usually thinner, harder, and lighter, ground to a finer edge that rewards good board technique and regular honing. That same thinness is the trade-off: the edge is less forgiving of bone, frozen food, and twisting cuts, and it asks for a little more care in maintenance in exchange for its keenness.

View full knife type guide →

Cutting edge steel

SheffCut

High-carbon, low-alloy fine-grain steel with niobium

Typical HRC
63–65
Corrosion class
Carbon
Production
Conventional
Origin
United Kingdom (GFS / Sheffield)

SheffCut is one of the recent entries in the modern carbon-steel revival: in essence, 26C3 with a small (~0.10 percent) niobium addition for further grain refinement and a touch more wear resistance. The steel is produced and marketed by Sheffield specialty supplier GFS and has been adopted enthusiastically by the British and American forging communities.

For the cook, SheffCut behaves almost identically to 26C3: a clean apex, easy sharpening, edge retention competitive with the best non-powder carbons, and toughness good enough to allow thinner geometries than the simple carbons can support. The niobium addition is genuine but subtle — a small but measurable improvement on what was already a very strong steel. Patina behaviour is conventional.

SheffCut is often presented as a "Sheffield carbon revival" — a deliberate reframing of UK steelmaking in the post-Sheffield-decline era — and it is, narratively as well as metallurgically, a worthwhile project. Among the makers Modern Cooking carries, Konstantinos Noulis works in SheffCut. It is the kind of steel a customer ends up with after asking for "the best non-stainless edge a UK maker can give me."

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Convex

A grind whose bevel bulges outward in a gentle curve from spine to edge, rather than running flat. That extra steel directly behind the edge makes a convex grind notably strong and resistant to chipping, while the curved geometry helps food release and lets the blade glide through dense ingredients with less wedging than a flat grind.

The strength comes at the cost of ultimate thinness and ease of maintenance. A convex edge has more metal behind it, so it is not quite as effortlessly keen as a thinly flat-ground edge, and it is harder to sharpen freehand — holding the curve takes a stropping technique or a deliberate hand rather than a single fixed angle. The reward is an exceptionally tough, smooth-cutting edge.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

View full details