• Nakiri 180mm Silver Line 1.2419
  • Nakiri 180mm Silver Line 1.2419 – detail view
  • Nakiri 180mm Silver Line 1.2419 – side profile
  • Nakiri 180mm Silver Line 1.2419 – handle detail
  • Nakiri 180mm Silver Line 1.2419 – blade close-up
  • Nakiri 180mm Silver Line 1.2419 – view 6
1 6

Nakiri 180mm Silver Line 1.2419

Nakiri 180mm Silver Line 1.2419

By Martin Huber

No longer available

Martin Huber

Reserve your place

We'll only email you when there's something to say. Invitations go out in signup order as new work becomes available.

Martin Huber is famous for his Nakiri's and Cleaver's. Forging large flat squares might not seem like a challenge, but actually it is one of the more difficult profiles to do well. Martin's Nakiri's are an absolute joy to use and although this is a knife primarily designed as a vegetable prep workhorse, you will quickly find yourself using the knife for more general tasks. With a fine taper, wide convex bevels and a lovely thin and razor sharp edge this is Nakiri will perform in delightful fashion. Balanced perfectly along all axis's the knife also sit exceptionally well in the hand. 

This Nakiri is part of Martin's "Silver Line" series, which is named for the nickel diffusion barrier between the premium 1.2419 core and the 1.2842 cladding.  Etched black for contrast, its striking look reminiscent of the Austria Alps with their white peaks. The blade is completed with a touch of forge scale around the spine and a lightly tempered neck. The handle is Martin's classic tapered Rokkaku Hanmaru profile in a beautiful black Palm and Bog Oak combination.

Martin is constantly pushing the boundaries in terms of performance and fit and finish. Every detail is carefully considered firstly in terms of performance and comfort and finally in terms style. This piece is certainly going to bring joy in the kitchen for many years to come.

Product Specification
  • Blade Type:
  • Edge Length: 180mm
  • Spine Heel: 2.69mm
  • Spine Mid: 2.2mm
  • Spine Tip (20mm before): 1.21mm
  • Blade Height: 60mm
  • Weight: 243g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 63
  • Blade Construction:
  • Blade Finish: Brute de Forge, Acid Etched (Forced Patina), Matte Polish
  • Grind:
  • Handle Construction:
  • Handle Materials: Black Palm, Bog Oak
  • Handedness: Ambidextrous

Blade type

Nakiri

菜切

A double-bevel vegetable knife with a tall, rectangular blade and a straight edge that meets the board along its full length. That flat profile is built for one job done exceptionally well: clean, full-contact push and chop cuts through vegetables, with the height giving knuckle clearance and a broad face to guide sliced produce. There is no belly to rock, because rocking is not what it is for.

The nakiri's specialisation is also its limit. It is superb on vegetables and unhurried prep, but the straight edge and squared-off tip make it poor at the tip work, rocking, and protein tasks a gyuto or santoku handle easily. It is best understood as a dedicated vegetable knife that earns its place alongside a more general blade rather than replacing one.

View full knife type guide →

Cutting edge steel

1.2419

Low-alloy tungsten-chromium tool steel

Typical HRC
62–65
Corrosion class
Carbon
Production
Conventional
Origin
Germany (DIN 105WCr6); approximately the European 125SC family in spirit but more alloyed

1.2419 is the German tungsten-chromium tool steel that sits a clear step above the simple carbons in alloy content, with about 1.05 percent carbon, 1.0 percent chromium, and 1.1 percent tungsten. It is closely related to 1.2519 (which adds vanadium) and to its leaner sub-variant 1.2419.05.

In a kitchen knife it runs at 63–64 HRC, sharpens cleanly, and produces an edge with notably better wear resistance than W2 or 80CrV2. The W- and Cr-rich carbides do real work; toughness is good for the hardness, and patina behaviour is moderate. It is a steel that rewards a maker who can dial in heat treatment and grain control.

European bladesmiths have used 1.2419 for kitchen and outdoor knives for decades. It is well respected in the Solingen tradition and remains a credible choice for a refined carbon-edge knife. Among the makers Modern Cooking carries, Martin Huber, Karol Karyś, Fredrik Spåre, Michał Lipiński, and Birch & Bevel work in this steel. The community sometimes discusses 1.2419 in the same breath as Aogami #1 — not chemically identical, but in a similar performance neighbourhood.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Convex

A grind whose bevel bulges outward in a gentle curve from spine to edge, rather than running flat. That extra steel directly behind the edge makes a convex grind notably strong and resistant to chipping, while the curved geometry helps food release and lets the blade glide through dense ingredients with less wedging than a flat grind.

The strength comes at the cost of ultimate thinness and ease of maintenance. A convex edge has more metal behind it, so it is not quite as effortlessly keen as a thinly flat-ground edge, and it is harder to sharpen freehand — holding the curve takes a stropping technique or a deliberate hand rather than a single fixed angle. The reward is an exceptionally tough, smooth-cutting edge.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

View full details