1 8

Gyuto 250mm KAZE Twist Damascus Clad SanMai, Apex Ultra Core

Gyuto 250mm KAZE Twist Damascus Clad SanMai, Apex Ultra Core

By Antoine Kniamen

$77,914.00 TWD
$77,914.00 TWD
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 1 left

Antoine Kniamen forges alone near Annecy in eastern France, and KAZE — Japanese for wind — is his top performance line, where cutting is the first consideration and everything else answers to it: he forges the bevels in close to their final geometry before grinding them, which is both a more precise and a more efficient route to the shape, and he keeps them low. This 250mm gyuto is one of a kind, and it carries that thinking into a three-layer composite, or san-mai, construction, with a multi-bar twist damascus cladding of Antoine's own making, forged from 1095 and 15N20, over an Apex Ultra core.

A spine of 3.82mm at the heel tapers through 1.8mm at mid-blade to 1.03mm behind the tip, and at 204g the knife is light for a 250mm blade — composed and stable through the rear, increasingly deft toward the front. The convex bevels carry it through dense ingredients with very little drag and release food cleanly, and 60.48mm of height at the heel keeps knuckles well clear of the board. The core is Apex Ultra, the low-alloy carbon steel built around a high tungsten content by Larrin Thomas, Marco Guldimann and Tobias Hangler, and Antoine's heat treatment takes it to 66 HRC, for a keen edge that holds through months of heavy use and still comes back readily on a stone. The finish follows the forging — textured kurouchi from the spine down to the top of the bevels, with the pattern showing through it, while the bevels themselves are taken down on stones to an even, consistent satin and then deeply etched to draw the twist damascus out in fine contour lines, the Apex Ultra core emerging as a clean line along the edge.

The handle is a mono-block octagon in Antoine's classic style, cut from green Raffir Alume — an aluminium mesh set in translucent coloured resin, so the metal reads as a shifting three-dimensional grain beneath the surface rather than a pattern printed on it — and finished against a bead-blasted stainless bolster and name plate. The octagonal section is ergonomic and comfortable in the hand, and the knife balances directly at the maker's mark.

Another exceptional piece from Antoine Kniamen, this KAZE gyuto pairs the cutting performance the line is built for with the style that makes his work unmistakably his own. We are very proud to be able to offer it.

Product Specification
  • Blade Type:
  • Overall Length: 373mm
  • Edge Length: 250mm
  • Spine Heel: 3.82mm
  • Spine Mid: 1.8mm
  • Spine Tip (20mm before): 1.03mm
  • Blade Height: 60.48mm
  • Weight: 204g
  • Cutting Edge Steel:
  • Steel class: Carbon
  • HRC: 66
  • Blade Construction:
  • Blade Finish: Kurouchi, Brut de Forge, Acid Etched (Forced Patina), Satin Polish
  • Grind:
  • Handle Construction:
  • Handle Materials: Raffir Alume, Stainless Steel
  • Handedness: Ambidextrous

Blade type

Gyuto

牛刀

The gyuto is the Japanese interpretation of the western chef knife, and the most versatile blade in a modern kitchen. It carries a long edge, most often 210 to 270 mm, that runs flatter through the heel than its western counterpart before rising in a gentle, late curve to a fine point — a line that favours push- and pull-cutting while still allowing a rocking motion when the work calls for it. There is enough height at the heel to keep knuckles clear of the board, and the tip is fine enough for detail work, which is why most cooks reach for it first.

The flatter edge is the defining characteristic and the trade-off both. More of the blade lands on the board at once, which suits push cutting and gives clean, decisive contact through an ingredient, but a cook who works primarily by rocking will find less curve to work with than a western profile offers. Modern makers increasingly blur the line between the two, drawing a profile that rocks and push-cuts equally well — Birch & Bevel's Modern Gyuto profile, Antoine Kniamen's Western Gyuto, and Benjamin Kamon's own gyuto profile are all examples of that hybrid thinking.

View full knife type guide →

Cutting edge steel

Apex Ultra

Low-alloy fine-grain carbon tool steel

Typical HRC
64–68
Corrosion class
Carbon
Production
Conventional
Origin
Austria (ApexUltra project — developed by Larrin Thomas, Marco Guldimann and Tobias Hangler; FFG-funded, associated with Messerschmiede Hangler)

Apex Ultra is one of the most carefully engineered non-stainless kitchen knife steels in modern circulation — a steel designed from the ground up specifically for handmade knives, rather than borrowed from another industry. It was developed by metallurgist Larrin Thomas together with smiths Marco Guldimann and Tobias Hangler. It is a low-alloy carbon steel — roughly 1.25 percent carbon, 2.6 percent tungsten, 1.5 percent chromium and a 0.4 percent vanadium addition, with manganese and silicon kept low. That composition is tuned for high purity and a fine, evenly distributed mix of chromium-enriched iron carbides, tungsten carbides and vanadium carbides — the structure that lets it hold a very hard edge without the coarse carbides or plate martensite that sap toughness in other high-hardness carbon steels.

What this means for a cook is unusual permission. Apex Ultra carries very high toughness in the 66+ HRC range — the highest of any knife steel its developers have tested at that hardness — so you can ask a maker to grind it thin and run the heat treatment hard, and the edge will hold far longer than the carbon steels smiths usually forge, without microchipping. It forges and forge-welds much like 52100 or 1.2562, sharpens cleanly on natural and synthetic stones without needing diamond plates, and its modest chromium slows patina a little — though it is not stainless and should be cared for as a carbon steel.

Apex Ultra has become a signature steel of the European maker community, and the Modern Cooking catalogue carries an unusually deep bench of smiths working in it. Tobias Hangler himself heads that group, alongside Marco Guldimann, Benjamin Kamon, Martin Huber, Jonas Johnsson, Karol Karyś, Birch & Bevel, and MCx. It is genuinely a step forward — one of the relatively few cases where the marketing claims and the underlying metallurgical data are saying the same thing.

View full steel guide →

Blade construction

Laminated Steel

A category covering knives built from multiple layers of different steels forge-welded together. The hard cutting steel is sandwiched between softer outer layers (cladding) that protect the core, add toughness, and often contribute visual contrast.

The most common laminated constructions in the Modern Cooking catalogue are:

SanMai (三枚) — three layers: hard cutting steel in the centre, softer cladding on both sides. The traditional and most common form.

GoMai (五枚) — five layers: a hard core, two intermediate layers, and two outer layers. Adds visual depth and structural complexity.

KuMai (九枚) — nine layers: similar logic, with more cladding layers for additional pattern and structural variation.

GoMai and KuMai are often chosen not only for the additional layers and visual depth, but also because the intermediate layers can act as a nickel diffusion barrier — limiting carbon migration out of the core into the cladding during forge welding, and protecting the core's intended carbon content through the heat of the forging process.

In all cases the cutting performance is determined by the core steel; the outer layers are cosmetic and structural. The lamination contributes corrosion protection (when a stainless jacket clads a carbon core), reduced reactivity, and the visible boundary between core and cladding that gives the knife its character.

View full construction guide →

Grind

Convex

A grind whose faces curve outward in a continuous arc rather than falling in a straight line. The practical consequence is that it has no shoulder — no abrupt step where a bevel meets the blade face. Food release improves for the same reason: a curved face touches the cut surface along a narrow band instead of a full flat plane, so slices break away rather than clinging. Drag behaves differently too. A convex blade carries more steel than a flat grind of the same spine thickness, so it is not the lowest-drag geometry available, but the resistance it does create builds smoothly through the cut instead of arriving all at once as the food meets a bevel transition. The feel is progressive rather than sudden.

The curve also supports the edge. Steel thickens quickly behind the apex, which raises edge stability at a given sharpening angle — the apex is less prone to rolling or chipping under lateral load. How much of that you get depends on where the convexity sits. A face can be curved the whole way from spine to edge, or the curve can be confined to the last millimetre or two as a convex "appleseed" edge on an otherwise flat blade. The first shapes how the knife moves through food; the second is felt almost entirely at the edge.

View full grind guide →

Handle construction

Hidden Tang

A construction in which the tang runs into the handle but stays concealed inside it, rather than showing between two scales. A narrower tang — a full-length stick or a shorter projection — is set into a drilled or burned channel in a one-piece handle and secured with adhesive, a friction fit, or a threaded fitting drawn up against the blade. This is the traditional construction of Japanese wa-handles and many European hidden-tang knives.

The design puts the handle material in charge of the look and feel: a single piece of wood, horn, or composite — often with a ferrule or spacers at the front — is shaped into any cross-section the maker wants, from the classic octagonal and D-shaped wa profiles to fully rounded Western forms. With no steel showing along the grip, the handle can be slim and light, and is frequently made to be removed and replaced, with the balance sitting toward the blade.

View full construction guide →

Shipping & Returns

Shipping

We process orders 5 days a week (Monday - Friday) and ship from our shop in Sydney, Australia. We ship with FedEx, UPS and DHL.

We are happy to offer free international shipping on a variety of orders depending on location and order value.

Free Shipping Regions and Minimum Order Values

For Australia and New Zealand the minimum is $500AUD. For the rest of the world it is approximately €1000EUR. The discount is applied automatically when you reach the minimum cart value at checkout.

Returns

If you're not entirely happy with your purchase, you can return it within 14 days of delivery for a refund. The item must be in its original condition with all original packaging.

  • Returns are accepted for 14 days
  • The customer is responsible for return shipping costs
  • A 15% restocking fee may be applied to change-of-mind returns
  • We do not accept returns on second-hand items for change of mind

Faulty or Damaged Items

You must notify us within 5 business days of receiving your order. Photographic evidence of damage is required. Once approved, Modern Cooking will cover return shipping costs.

Product Care

Cleaning: Clean by hand with warm water. Avoid wetting the handle when possible.

Sharpening: We advise using whetstones to sharpen your knives and a honing rod or steel to maintain the burr between sharpening sessions.

Reactive Steels: Reactive steels like Aogami Super, Apex Ultra or premium reactive German and Swedish steels are susceptible to rust if not properly cared for. Keep the knife dry between uses and when storing for longer periods, wiping the blade with Tsubaki oil or another food-safe oil is a wise choice. A patina can be a beautiful personal feature on your knife and helps to stop rust forming.

Handle Care: For non-stabilised wooden handles, apply Tsubaki oil or another food-safe oil from time to time. Food-safe wax can be applied to both stabilised and non-stabilised wooden handles. Never apply hot wax or oil as you risk warping or damaging the handle.

View full details